• 5x 100nF (0.1uF, film)
• 1x 10uF (electrolytic)
• 2x 22uF (electrolytic)
POTENTIOMETERS
• 2x 500kB (linear)*
• 1x 100kA (logarithmic)
• 1x 50kB (linear)
• 1x 25k trimpot
* This is what the schematic calls for.
If I had to do it again, I’d make
these 25kC (reverse log) It’s up to you.
• 1x MPSA13
• 2x 1n4148
MISCELLANEOUS
• 1x piece of stripboard
(Veroboard), cut to spec
• 1x 8-pin DIP socket
• 2x transistor sockets (
sold as SIP sockets)
• 1x SPST (SPDT is ok)
toggle switch
• Wire
SEMICONDUCTORS
• 1x TL072
• 1x 2n5088
OK, LET’S GET THIS SHOW ON THE ROAD!
ToneReport.com
43