STEP 1:
Place the resistors in the board, bend
the leads outward, then solder them, clip
them and save the leads.
STEP 2:
Use these discarded leads to form the
jumper wires. Bend the leads out, solder
them and clip the nubs off. Save just one
more lead for later.
STEP 3:
Put the sockets (if using) into the board
and place a fl at object on top. Flip the
board to hold the sockets into place,
then solder them in.
40
DIY //
Clean Blend Fixes Everything: Build Your Own Colorsound Bass Fuzz