Subaru Outback Manuals 2015 Outback Owner's Manual | Page 190

Instruments and controls/Multi information display ! SRVD (Subaru Rear Vehicle Detec- tion) (if equipped) After entering the “SRVD” menu, select the “Warning Volume” menu. You can set the volume of the warning buzzer that sounds when the SRVD is in use. You can select “Max”, “Mid”, “Min” or “Off”. ! Vehicle Setting After entering the “Vehicle Setting” menu, select one of the following menus. ! Keyless Entry System You can change some of the settings of the remote keyless entry system (all models) and keyless access with push- button start system (if equipped). After entering the “Keyless Entry System” menu, select one of the following menus. . Audible Signal: The audible signal can be activated or deactivated. Select “On” to activate. Se- lect “Off” to deactivate. . Hazard Warning Flasher: The hazard warning flasher operation can be activated or deactivated. Select “On” to activate. Select “Off” to deactivate. . Security Relocking: The automatic locking operation period can be set or customized. Select the preferred seconds to customize the op- eration period. Select “Off” to deactivate the operation. . Driver Door Unlock: The door unlock selection function for the driver’s door can be activated or deacti- vated. Select “On” to activate. Select “Off” to deactivate. . Rear Gate/Trunk Unlock: The door unlock selection function for the rear gate/trunk can be activated or deac- tivated. Select “On” to activate. Select “Off” to deactivate. ! Defogger The defogger and deicer system can be set for the continuous operation mode or automatic shut-off mode. Select “Contin- uous” to select the continuous operation mode. Select “15 minutes” to select the automatic shut-off mode. ! Interior Light The setting for the period of time in which the interior lights remain on (OFF delay timer) after closing the doors and/or the rear gate can be set or customized. Select the preferred seconds to customize the operation period. Select “Off” to deactivate the OFF delay timer. 3-41 ! Auto Light Sensor The operational sensitivity of the auto on/ off headlights can be set. You can select “Max”, “Mid”, “Low” or “Min”. ! Welcome Lighting After entering the “Welcome Lighting” menu, select either of the following me- nus. ! Approaching Time Set The setting for the period of time in which the low beam headlights remain on when approaching the vehicle can be set or customized. Select the preferred seconds to customize the operation period. Select “Off” to deactivate the welcome lighting function when approaching. ! Leaving Time Set The setting for the period of time in which the low beam headlights remain on when exiting the vehicle can be set or custo- mized. Select the preferred seconds to customize the operation period. Select “Off” to deactivate the welcome lighting function when exiting. ! Default Settings Select “Yes” to use the menu screen to restore customized settings to the factory default settings. Select “No” to return to the previous screen without restoring to CONTINUED