Electrical & Electronics
Everything you expect from an enclosure
manufacturer... and more!
innovative
enclosure solutions
for industrial & electronic
applications
www.eta-enclosures.co.uk
Luso introduces SynQor’s high efficiency Hi-Rel and
Quad-output DC-DC Bus Converters for military applications
L
uso Electronics announces the
availability of SynQor’s latest
Hi-Rel and Quad-output DCDC Bus Converters designed
for ultra-high efficiency,
reliability and performance. Awarded
with key product quality and safety
certifications for higher power military
use, the converters operate from -55°C
to +125°C baseplate temperature with no
de-rating.
SynQor’s new isolated/unregulated DC-DC
B us Converters – the MQBQ-270-28B and
MQBQ-28-28B – employ the company’s
Intermediate Bus Architecture that deliver
a class-leading efficiency of over 95% at
full- and half-load operation with up to
400W of output power across the input
voltage range.
The SynQor MQBQ-270-28B and
MQBQ-28-28B Bus Converters feature
a continuous input voltage range of
230-400Vdc and 18-40Vdc respectively.
The former creates an isolated and
unregulated output voltage that is
nominally 28V when the input is 270V,
the latter an output voltage of 27V when
the input is 28V. With each converter
there is an additional droop in the output
voltage of less than 5% at full load
current.
In a quarter brick package and input
voltage range of 6-15V, the MCOTS-N
QUAD is a non-isolated DC-DC converter
employing synchronous rectification to
achieve high conversion efficiency. The
quad-output converter generates three
positive output voltages (up to 30A each)
Email: [email protected]
www.lusoelectronics.com
Manx Utilities, is a Statutory Board of the Isle of Man
Government responsible for providing its customers with
safe, reliable, efficient and economic supplies of electricity,
natural gas and clean water; as well as collecting/processing
waste water, and delivering flood risk management services.
On a daily basis Manx Utilities electricians perform complex electrical tests and maintenance work to
keep the systems working flawlessly.
• Easy to install, thin, clip-around
AC current transducers
• Rated current from 100A to 50kA
• Single-phase or 3-phase
models available
• Suitable for a wide range of
industrial applications, including:
monitoring, logging and
protection systems
RCT1A
- True RMS AC
current measurement
- Genuine current
transformer (CT)
replacement 0-1A
output
- Instantaneous voltage
output: 0.333V or 5Vac
- Standard 4-20mA
output
- Accurate, <0.5°
phase error at 50Hz
- Accurate and wide bandwidth (0.6Hz to
1MHz)
- Use with SCADA &
PLC systems and
data-loggers
- Safe operation
RCTrms
- Use with meters,
data-loggers and
acquisition systems
The SynQor military spec digital bus
power converters are available to
purchase from Luso Electronics for
customers in the UK and Ireland.
Martindale Electric
Provides a Flexible Solution
to a Current Problem
RCT Industrial AC
Current Transducers
RCTi
and one negative output voltage (up to
1A), with all outputs delivering a wide
trim range to offer the flexibility to the
user to set custom voltages if necessary.
Protection features include shutdowns
for points when currents, voltages or
temperatures are running too high as well
as a lockout for any input under-voltage.
There was an issue, however, that they could not overcome and has been a problem for many years,
costing the organisation money and the electricians’ time. Their problem was finding a reliable and
safe solution to measure the current flowing through Aculock fuses in a street level substation. It was
obvious to engineers that regular clamp meters would not reach around the fuses and conventional
flexible rogowski coils were just too thick to pass through the tube. Manx Utilities wanted a reliable
solution which provided accurate measurements and complied with safety regulations. On one of
Martindale’s regular visits to the Isle of Man, Martindale demonstrated a solution to these testing issues.
Andy Kemecsei, Key Account Manager at Martindale Electric, met with Manx Utilities to demonstrate
the new CM100 Flexi-Clamp.
Manx Utilities were impressed with the initial results and decided to work with the CM100 for a trial
period. The CM100 has made the previously impossible task of reaching around the ACULOCK fuse easy,
instant and more importantly provides accurate measurement results. The CM100 passed the trial test
period and is now in Manx Utilities list of officially approved equipment. For more information, please
contact Martindale Electric on 01923 441717 or visit www.martindale-electric.co.uk
- Use with meters
taking standard CT
inputs
AT Engine Controls Ltd, (formerly Hawker Siddeley Dynamics Engineering - HSDE),
has over 50 years’ experience in the design and manufacture of high reliability,
mission critical electronic and mechanical control and monitoring systems for the
Aerospace, Defence and Oil and Gas sectors.
ATEC’s capabilities include Build to Print and Post Design Support including
Obsolescence management.
ATEC recently joined Prime Minister David Cameron’s business delegation to South
East Asia as part of a drive to increase UK exports to £1 trillion.
Please contact us
to discuss your
application
AS9100C accredited and recently achieving Investors in People Gold Award.
Power Electronic Measurements
Tel: +44 (0)115 946 9657
66
PECM Issue 16
www.pemuk.com
AT Engine Controls Ltd, Units 10-11 Shield Drive, Wardley Industrial Estate,
Worsley, Manchester, M28 2QB
Tel: +44 (0) 161 727 0600 • Fax: +44 (0) 161 727 7188
Email: [email protected] • www.atenginecontrols.com