April 2017
I will report back on that procedure
when I remove the starter at home.
However, there is a “work around” if
you have on hand 18 inches of fine
wire. From underneath the car, with a
wire formed in a “u” shape, you can
loop the shaft in front of the pinion
gear and pull it back and then tie it off
around the rebound spring at the end
of the shaft. Problem solved. You
just need a push or use of the starting
handle and you’ll be back on the road
going to wherever you were intending
to go, without the embarrassment of
having to wait for a tow truck to bring
you home!
From adversity, comes the fix: agile
use of a piece fine wire; make sure
you carry some (along with overalls),
it could be useful when you least ex-
pect it.
Geoff Goode
Club Registrar for the Conditional
Registration Scheme
IS YOUR GARAGE OR WORKSHOP A
BIT OF A MESS ?
HERE IS THE SOLUTION...
CUSTOM MADE WORK BENCHES AND STORAGE UNITS
TO SUIT EVERY
REQUIREMENT AND
BUDGET
HERE ARE JUST
2 EXAMPLES
Also available are heavy
duty benches with no back
board or drawers made
from high strength racking components from just $220
Contact: Geoff Trowbridge ( club member) on Mob: 0412 764 868
Adelaide Stacking & Racking
74 William Street Beverley SA 5009
39