Modes of Operation | |
scan mode |
input signal amplified with gain 20 |
Controller Hardware | |
chassis |
19 ” rack , 2 rack units , 9 x 45 x 40 cm ³ |
weight |
7.5 kg |
power supply |
100 / 115 / 230 V , 50 .. 60 Hz |
power consumption |
max . 60 W |
connector |
fused IEC inlet |
connecting cable ( ELE - POS ) |
1 per axis , length : 2 m |
Input Signals | |
DC in voltage range |
-10.. 10 V |
AC in voltage range |
-10.. 10 V |
coupling |
DC , zero offset |
input resistance |
1 Mohm AC |
input current |
< 2 µ A |
input connectors |
BNC , 50 Ohm |
Output Signals | |
scanning -output voltage range |
-220.. 200 V |
scanning -gain |
20 |
scanning - maximum current |
10 mA |
scanning - power bandwidth |
650 Hz @ sinus output 400 Vpp |
scanning - small signal bandwidth |
2 kHz ( response corresponding to 2nd order |
Bessel filter ) | |
scanning - slow rate |
800 V / ms ( without load ) |
amplification accuracy |
< 0.2 % |
amplification T coefficient |
< 50 ppm / K |
output noise |
20 µ V ( RMS ) |
output filter |
--- |
maximum capacitive load |
1 µ F |
zero voltage output in GND mode |
connected to chassis ground directly or via |
100 kOhm | |
Models and Part Numbers | |
piezo tube controller |
ANC250 ( art . no . 1002701 ) |
Options & Upgrades | |
19 ” rack mounting kit |
handles ( art . no . 1001606 ) |
faster amplifier |
signal bandwidth 10 kHz ( ask for details ) |